A SIMS study of thermal diffusion profiles of boron into nitrogen- and boron-doped polysilicon layers on silicon oxide
DOI:
https://doi.org/10.52304/.v27i3.593Keywords:
secondary ion mass spectrometry (SIMS), chemical vapor deposition (CVD), polysilicon, silicon oxide, annealing, doping, diffusionAbstract
By the secondary ion mass spectrometry (SIMS) method, the distribution of boron impurities
was examined in multilayer thin films of polycrystalline silicon doped with boron and nitrogen,
deposited on SiO2 substrate, both before and after thermal annealing. It is shown that after
thermal annealing, the boron concentration remains stable in the upper layer of the polycrystalline
silicon with boron doping to a depth of 0.09 μm, while in the nitrogen-doped layer, a sharp
decrease observed to a depth of about 0.19 μm, and boron does not reach the SiO2 layer. The
results indicate a slowdown in the diffusion of boron impurities due to the presence of an
amorphous layer and nitrogen. This result may be useful for maintaining the integrity of the
SiO2 layer.