The Effect of Thermal and Laser Annealing on the Composition and Structure of Ion-Dopped Ge Layers
DOI:
https://doi.org/10.52304/.v27i3.594Keywords:
ion implantation, sputtering, composition, thermal annealing, laser annealing, Auger electron spectroscopyAbstract
The effects of thermal and laser annealing on the structure and composition of Na+-implanted
Ge(111) were investigated using Auger electron spectroscopy and secondary ion mass spectrometry.
Ion implantation was performed with Na+ ions at an energy of E0 = 1 keV and a dose
of D = 10¹6 cm−². This process resulted in complete amorphization of the Ge surface layers and
the formation of various Na–Ge compounds within the ion-doped region, containing 8–10 at.%
of unbound Na and Ge atoms. Upon annealing at T = 900 K, a NaGe-type film forms, though
the doped layer remains amorphous. At T = 1100 K, a uniform single-crystal NaGe2 film of
approximately 30–35 Å thickness is observed. Laser annealing at an energy density of W ≈ 1.2
J·cm−² produces a single-crystal cubic NaGe film with a thickness of 35–40 Å, while increasing
W ≈1.5 J·cm−² results in the formation of a NaGe2 film of similar thickness. Additionally,
for samples implanted with Na+ ions at E0 ≥ 3 keV, heating at T ≤ 700 K or laser annealing at
W ≤ 1.5 J·cm−² leads to increased sodium concentration near the surface and a shift of the sodium
depth profile CNa peak toward the surface.