THE INFLUENCE OF THE INFLUENCE OF REVERSE DISPLACEMENT ON THE PARAMETERS OF SOLAR ELEMENTS BASED ON CIGS

Authors

  • А.Г. Камилов Физико-технический институт АН РУз

DOI:

https://doi.org/10.52304/.v22i4.163

Keywords:

solar cells, buffer layer, CIGS, reverse bias, carrier concentration, efficiency, I-V, C-V.

Abstract

The results of laboratory experiments to study the effect of reverse bias with a duration of 60, 600 and 2000 s. on the parameters of solar cells (SC) based on an absorbing layer consisting of Cu, In, Ga and Se (CIGS) with different thicknesses of the CdS buffer layer are shown. Experiments have shown that for the stable operation of CIGS SCs under natural operating conditions, the thickness of their buffer layer should be calculated taking into account the effect of reverse bias. The results of measuring the current-voltage characteristics of CIGS SCs with different thicknesses of the CdS layer before and after the exposure to the reverse bias showed that SCs with a smaller buffer layer thickness are more resistant to the effect of reverse bias. Based on the results of measuring the capacitance-voltage characteristics, it was found that when exposed to reverse bias in the dark, the capacitance of the structure increases, which corresponds to the classical model of the effect of reverse bias, and is the same for elements with different thicknesses of the buffer layer. After exposure to reverse bias under illumination, the capacitance of the structure and the concentration of charge carriers decrease, and to a lesser extent in elements with a thin buffer layer, which also indicates their resistance to reverse bias.

Published

2020-08-25

How to Cite

Камилов, А. (2020). THE INFLUENCE OF THE INFLUENCE OF REVERSE DISPLACEMENT ON THE PARAMETERS OF SOLAR ELEMENTS BASED ON CIGS. “Uzbek Journal of Physics”, 22(4), 227–236. https://doi.org/10.52304/.v22i4.163

Issue

Section

03. Physical Electronics. Physical Kinetics and Plasma Physics