Fabrication of CoSi2/SiO2/Si(111) Films by Laser Deposition and Their Electrophysical Properties

Authors

  • Б.Е. Умирзаков Ташкентский государственный технический университет
  • И.Р. Бекпулатов Ташкентский государственный технический университет
  • Б.Д. Игамов Ташкентский государственный технический университет
  • И.Х. Турапов Ташкентский государственный технический университет
  • А.З. Фаттахов Научно-технологический центр НПО ПРМ и ТС АО «Алмалыкский ГМК»

DOI:

https://doi.org/10.52304/.v24i2.336

Keywords:

light absorption and reflection coefficient, thermal annealing, band gap, sputtering, pulsed laser

Abstract

In this study, the optimal regime for the formation of CoSi2 pellets by high-temperature pressing is determined. A CoSi2/SiO2/Si(111) film was created by deposition of CoSi2 onto a SiO2/Si(111) substrate sputtered under the action of a solid-state pulsed laser. A study of the dependence of the energy of photons absorbed by the film on the wavelength of incident photons showed that the band gap is very sensitive to wavelengths in the visible and IR regions. X-ray diffraction analysis of the CoSi2/SiO2/Si(111) system formed at thermal heating showed that the CoSi2 film has a polycrystalline structure. The elemental composition and band gap of the CoSi2 film of various thicknesses were determined by scanning electron microscopy. For a CoSi2 film with a thickness of ≈3 monolayers the band gap is ~0.8 eV, and for a bulk CoSi2 film it is ~0.6 eV.

Published

2022-06-04

How to Cite

Умирзаков, Б. ., Бекпулатов, И., Игамов, Б. ., Турапов, И., & Фаттахов, А. (2022). Fabrication of CoSi2/SiO2/Si(111) Films by Laser Deposition and Their Electrophysical Properties. “Uzbek Journal of Physics”, 24(2), 150–155. https://doi.org/10.52304/.v24i2.336

Issue

Section

05. Optics and Spectroscopy. Laser Physics. Nonlinear Optics

Most read articles by the same author(s)

1 2 3 > >>