Influence of implantation of Ba+ ions on the emission properties tungsten

Authors

  • З.А. Исаханов Институт ионно-плазменных и лазерных технологий АН РУз
  • Ф.Я. Худайкулов Ташкентский государственный технический университет им. Ислама Каримова
  • Д.А. Ташмухамедова Ташкентский государственный технический университет им. Ислама Каримова
  • Б.Е. Умирзаков Ташкентский государственный технический университет им. Ислама Каримова

DOI:

https://doi.org/10.52304/.v24i4.382

Keywords:

level, emission, plasmon, desorption, energy loss, true secondary electrons, monolayer, ion implantation

Abstract

The composition and emission properties of W coated with a monolayer of Ba and implanted
with Ba+ ions and alkali metal ions Na+, K+, Cs+ with an energy of 0.5−8 keV at a saturation
dose of D=Dsat=(6–8)×1016 sm–2 were studied using Auger electron spectroscopy and true secondary electron spectroscopy (TSEs).. It has been established that in the case of identical
changes in eφ, the value of the secondary electron emission (SEE) coefficient in the case of ion
implantation is ~1.5 times higher than in the case of adsorption of Ba atoms. It has been established that in the region of small primary electron energy (Ep) at high concentrations of Ba the
levels of O3, O2, and O will make a significant contribution to the number of TSEs. In addition,
the presence of such levels increases the effectiveness of inelastically reflected electrons (IRE).
The analysis of data on the SEEs coefficients for spraying and ion-doped systems in the case
of alkali metals leads to similar results.

Published

2022-12-08

How to Cite

Исаханов, З., Худайкулов, Ф., Ташмухамедова, . Д., & Умирзаков, . Б. . (2022). Influence of implantation of Ba+ ions on the emission properties tungsten. “Uzbek Journal of Physics”, 24(4), 278–282. https://doi.org/10.52304/.v24i4.382

Issue

Section

04. Atomic and Nuclear Physics, Particle Physics

Most read articles by the same author(s)

1 2 > >>