Identification of the phases and structure of nanoparticles obtained by spark synthesis

Authors

  • А.А. Зарипов Институт ионно-плазменных и лазерных технологии Академии Наук Республики Узбекистан

DOI:

https://doi.org/10.52304/.v27i3.591

Keywords:

nanomaterials, porous structure, X-ray diffraction, energy-dispersive spectroscopy, sodium chloride, silicates, metal oxides, elemental analysis, crystal structure

Abstract

A comprehensive analysis of the composition of a multicomponent alloy, primarily consisting
of the elements Si, Na, Cr, Ni, Mg, Zn, Al, and Zr, synthesized in an aqueous NaCl electrolyte
solution, was conducted. The study utilized high-resolution electron microscopy, energydispersive
X-ray spectroscopy (EDS), and X-ray diffraction (XRD). Microscopy revealed a
heterogeneous porous structure, indicating potential applications in catalysis, filtration,
and drug delivery. EDS identified a complex elemental composition with a predominance of Si
and O, a significant amount of NaCl, and trace amounts of various metals. XRD confirmed
that the main crystalline phase is NaCl with a nanocrystalline size, and the presence of impurities
such as SiO2, ZnO, and TiO2 may cause slight deviations in the NaCl lattice parameters.
The calculated density of NaCl shows good agreement with the reference value. Although Ni,
Mg, Al, Zr, and W were detected by EDS, the low concentration makes their unambiguous
identification by XRD difficult. The obtained results suggest a multi-component material with
a porous structure, where NaCl is the dominant phase, and the silicate component and
metal traces may influence its properties and potential applications, requiring further investigation.

Published

2025-10-31

How to Cite

Зарипов, А. . (2025). Identification of the phases and structure of nanoparticles obtained by spark synthesis. “Uzbek Journal of Physics”, 27(3). https://doi.org/10.52304/.v27i3.591

Issue

Section

03. Physical Electronics. Physical Kinetics and Plasma Physics