Structural, morphological, and optical properties of Sb2(SxSe1-x)3 solid solution films for solar cells
DOI:
https://doi.org/10.52304/.v27i4.615Keywords:
Sb2Se3, Sb2S3, Sb2(Se,S)3, band gap, morphology, X-ray diffraction, scattering spectraAbstract
The films Sb2(SxSe1-x)3 were studied by scanning electron microscopy of films grown at different
vapor pressures. Microcrystals in the films are evenly distributed over the surface of the
substrate. The morphology of the film surface changed significantly depending on the ratio of
elements S/(S+Se) in the vapor phase. Crystallites synthesized at different ratios of S/(S+Se)
components had the shape of microrods with a diameter d=0.5−2 μm and length l=3−5 μm
with a noticeable displacement angle relative to the substrate. X-ray diffraction patterns
showed the presence of peaks corresponding to the compounds Sb2Se3 and Sb2S3, as well as
their solid solutions. All solid solutions had an orthorhombic structure. The optical properties
of Sb2(SxSe1-x)3 films obtained on glass substrates at a substrate temperature of 420°C were
studied using a spectrophotometer (UV-5100 UV/Vis). The energy gap values (Eg) obtained
for Sb2(SxSe1-x)3 films were 1.2, 1.35, 1.5 and 1.65 eV at different values of S/(S+Se). The
change in band gap energy is associated with a change in the ratio of elements S/(S+Se).